Transformational  Synergetic  Exciting         HOME Products Campaigns/Events Blog List Sponsorship What's New Stock Status FAQ Blog Information Direct Shop   Ｍｉｎｉ−ｚ Tamiya 1/12  1/10 RC CAR Battery Removal Tools Taper Clamp Left Hubs for F103/F104 Diff Ring Truer Clevises Midget Combination Wrench 12mm Lapping Films for the Diff Ring Truer Modular Bumpers 64 Titanium Diff Cap for F104 Power Lines Free Rear Axles Suspension Plates for F104 Differential Housing Sets Gear Differential Titanium Shafts Suspension Plates Protecbumpers These pages in white are written in Japanese. As they have some product photos posted, please take a look at them. More pages in English are coming soon.    QTEQ Power Banana (2 pcs)  "QTEQ Power Banana", 4mm banana plug for electrical RC car batteries achieves maximum energy loss reduction. This solid multi-contact banana plug combines the advantages of both solid and multilam type bananas plugs.      Extremely low resistance:   It consists of 6 contacts of resilient copper alloy and each contact has two contact points.   The twelve contact points--three times more than those of existing solid type banana plugs--      reduce contact resistance to one third.   In addition, contact resistance is reduced as a result of the high contact pressure      facilitated by the use of the resilient copper alloy.   Specially formed pocket on its head reduces excessive solder volume      which interferes with the path of electrical current.   The plug, coated with 24k gold plating of contact point grade, reduces contact resistance      due to the extreme malleability of the pure gold used, thus enabling an almost integral fit      between the surfaces of the plug and battery socket.    High reliability:   Featuring twelve contact points equal to the multilam type, high contact pressure,      and 24k plating with little deterioration, the “Power Banana” maintains constant      and continuous contact.    Low head type:   Head height is about 2mm.    Convenient pocket:   It has a pocket on the head which enables a lead wire to be soldered   in the most appropriate      position.    Long life:      QT-110801    Two pieces to a set     Made in Japan      Specs Material High resilient copper alloy Finishing Coated with 24k gold plating of contact point grade Head diameter 7mm Manufacturing method NC Machined     Head diameter--7mm Consisting of 6 contacts, And, each contact is designed to contact with a battery socket surface at two points. The head is formed so that wire soldering can be done efficiently and effectively. Length below the head-- 14.5mm Made of highly resilient copper alloy with high spring pressure, the Power Banana achieves high contact pressure. Contact diameter is 4.4mm before it is plugged in. Therefore, the contacts are not expanded after machining like other existing banana plugs whose diameters are smaller than the battery sockets. Click to enlarge Click to enlarge   The pocket is designed and formed so that the lead wire can be soldered to fit into it. The jaw of the head tapers slightly so that it can be lifted up with a tool like a slotted screwdriver and taken out of the battery socket in case that it can not be removed. While 14 gauge wire is used in the photo, 12 gauge wire can be soldered in the same way. Click to enlarge Click to enlarge                                                Contact us Multiverse Inc.